Compaq HSG80 - StorageWorks RAID Array Controller Specifikace stáhnout pdf (Strana 159)

100

101

5–29

Compaq HSG80 Array Controller ACS Version 8.4 Configuration and CLI Reference Guide

Optional Steps

Following are some of the more common steps that can be performed anytime during

configuring.

Changing the CLI Prompt

Enter a 1- to 16-character string as the new prompt. For example, you could use the

prompt to indicate the controller’s name, such as “HSG1.”

Type the following command:

SET THIS_CONTROLLER PROMPT = “new prompt”

If you are configuring dual-redundant controllers, you can also change the CLI

prompt on it. Use the following command:

SET OTHER_CONTROLLER PROMPT = “new prompt”

See “SET controller,” page 7–91.

Setting the PVA Module ID Switch

The Power, Verification, and Addressing (PVA) module provides unique addresses to

extended subsystems. Each BA370 rack-mountable enclosure in an extended

subsystem must have its own PVA ID. Use PVA ID 0 for the enclosure that contains

the array controllers. Use PVA IDs 2 and 3 for the additional enclosures. Figure 5–8

illustrates the PVA settings in an extended subsystem.

See the documentation that accompanied your enclosure for more details about the

PVA and its settings.

1 2 ... 154 155 156 157 158 159 160 161 162 163 164 ... 395 396

Komentáře k této Příručce

Žádné komentáře

Compaq HSG80 - StorageWorks RAID Array Controller Specifikace Strana 159

Komentáře k této Příručce

Související produkty a manuály pro Síťové přepínače Compaq HSG80 - StorageWorks RAID Array Controller