Compaq 2000fc Průvodce řešením problémů stáhnout pdf (Strana 49)

Quick Troubleshooting Guide B-7

POST Error Messages Continued

Screen Message Beeps* Probable Cause Recommended Action

1781-Disk 1 Failure None Hard drive/format error. 1. Run Computer Setup (F10

Setup).

2. Clear CMOS.

3. Check cable seating/jumper

settings.

4. Run hard drive diagnostics.

5. Disconnect additional drives.

6. Run the Drive Protection

System test if available.

7. Replace the hard drive.

1782-Disk Controller

Failure

None Hard drive circuitry error. 1. Run Computer Setup (F10

Setup).

2. Clear CMOS.

3. Check cable seating /jumper

settings.

4. Run hard drive diagnostics.

5. Disconnect additional drives.

6. Run the Drive Protection

System test if available.

7. Replace the hard drive.

8. Replace the system board.

1790-Disk 0 Failure None Hard drive error or wrong

drive type.

1. Run Computer Setup (F10

Setup).

2. Clear CMOS.

3. Check cable seating /jumper

settings.

4. Run hard drive diagnostics.

5. Disconnect additional drives.

6. Confirm drive is supported on

this computer (Large drive

ROM support.)

7. Run the Drive Protection

System test if available.

8. Replace the hard drive.

9. Replace the system board.

* L = Long, S = Short

continued

Find Error Code

Click Here to Find Error Code

Click Here to Find Error CodeClick Here to Find Error CodeClick Here to Find Error Code

1 2 ... 44 45 46 47 48 49 50 51 52

Komentáře k této Příručce

Žádné komentáře

Compaq 2000fc Průvodce řešením problémů Strana 49

Komentáře k této Příručce

Související produkty a manuály pro Barebones pro PC / pracovní stanice Compaq 2000fc