Compaq ProLiant SL390s - G7 Server Uživatelská příručka stáhnout pdf (Strana 31)

Hardware options installation 31

Install the DIMM.

5. Install the server into the chassis.

6. Power up the server.

Hard drive guidelines

When adding hard drives to the server, observe the following general guidelines:

• The system automatically sets all drive numbers.

• If only one hard drive is used, install it in the bay with the lowest drive number.

• Drives must be the same capacity to provide the greatest storage space efficiency when drives are

grouped together into the same drive array.

Optional storage controllers provide support for hot-plug capability and drive LEDs. Controller options

are:

• The embedded controller supports non-hot-plug SATA hard drives. Drive LEDs are not supported.

• Optional SATA controllers support hot-plug SATA hard drives and drive LEDs.

• Optional SAS controllers support hot-plug SAS or SATA hard drives and drive LEDs.

Installing a hard drive

1. Power down the server (on page 24).

2. Remove the server from the chassis.

3. Rotate the HDD carrier handle up.

4. Insert the HDD carrier and align the pins.

1 2 ... 26 27 28 29 30 31 32 33 34 35 36 ... 86 87

Žádné komentáře

Compaq ProLiant SL390s - G7 Server Uživatelská příručka Strana 31