Compaq 4000S Specifikace stáhnout pdf (Strana 84)

Front I/O, Power Switch Assembly

Description Spare part number

Front I/O and power switch assembly 636926-001

The front I/O and power switch/LEDs are one assembly, attached to the front of the chassis. Push the

assembly into the chassis to remove.

1. Prepare the computer for disassembly (

Preparation for Disassembly on page 40).

2. Remove the access panel (

Computer Access Panel on page 41).

3. Remove the front bezel (

Front Bezel on page 42).

4. Remove the chassis fan (

Front Fan Assembly on page 72).

5. Rotate the drive cage to its upright position.

6. Disconnect the four cables from the system board as follows:

●

Yellow connector labeled FRNT USB1

●

Green connector labeled FRNT USB2

●

Blue connector labeled FRNT AUD

●

Black connector labeled PB/LED

7. Remove the screw that secures the assembly to the front of the chassis.

Figure 6-45 Removing the front I/O, power switch/LED assembly screw

74 Chapter 6 Removal and Replacement Procedures Small Form Factor (SFF) Chassis

1 2 ... 79 80 81 82 83 84 85 86 87 88 89 ... 187 188

Žádné komentáře

Compaq 4000S Specifikace Strana 84