Compaq ProLiant DL380 G3 with MSA500 Instalační příručka Strana 1

Procházejte online nebo si stáhněte Instalační příručka pro Barebones pro PC / pracovní stanice Compaq ProLiant DL380 G3 with MSA500. Compaq ProLiant DL380 G3 with MSA500 Installation guide Uživatelská příručka

  • Stažení
  • Přidat do mých příruček
  • Tisk
  • Strana
    / 55
  • Tabulka s obsahem
  • KNIHY
  • Hodnocené. / 5. Na základě hodnocení zákazníků
Zobrazit stránku 0
HP CONFIDENTIAL
Writer: Woody Jernigan File Name: a-frnt
Codename: Sopwith Part Number: 252621-003 Last Saved On: 9/17/03 12:49 PM
HP ProLiant DL380 Generation 3
Packaged Cluster
Setup and Installation Guide
November 2003 (Third Edition)
Part Number 252621-003
Zobrazit stránku 0
1 2 3 4 5 6 ... 54 55

Shrnutí obsahu

Strany 1 - Setup and Installation Guide

HP CONFIDENTIAL Writer: Woody Jernigan File Name: a-frnt Codename: Sopwith Part Number: 252621-003 Last Saved On: 9/17/03 12:49 PM HP ProLiant DL380

Strany 2

1 Packaged Cluster Components The HP ProLiant DL380 Generation 3 (G3) Packaged Cluster consists of two ProLiant DL380 G3 servers and an HP StorageWor

Strany 3 - Contents

Packaged Cluster Components Configuration Fixture The packaged cluster ships in a two-piece configuration fixture (1) that can be used to configure th

Strany 4

Packaged Cluster Components Configuration Fixture Disposal The server fixture and the storage fixture are environmentally safe and recyclable. The con

Strany 5 - About This Guide

Packaged Cluster Components 1-4 HP ProLiant DL380 Generation 3 Packaged Cluster Setup and Installation Guide HP CONFIDENTIAL Writer: Woody Jernigan

Strany 6

2 Setup Preparations Required Materials Before setting up your packaged cluster, locate the following materials included in the shipping box: • • • •

Strany 7 - Symbols in Text

Setup Preparations 2-2 HP ProLiant DL380 Generation 3 Packaged Cluster Setup and Installation Guide HP CONFIDENTIAL Writer: Woody Jernigan File Nam

Strany 8 - Getting Help

3 Component and LED Identification ProLiant DL380 Generation 3 Server Table 3-1: Front Panel Components Item Description 1 Hard drive bays 2 Ba

Strany 9 - Reader’s Comments

Component and LED Identification 4 CD-ROM drive Table 3-2: Front Panel LEDs and Buttons Item Description Status 1 Internal health LED Green = Norm

Strany 10 - Packaged Cluster Components

Component and LED Identification Table 3-2: Front Panel LEDs and Buttons continued Item Description Status 5 UID LED button Blue = Activated Flash

Strany 11 - Configuration Fixture

Component and LED Identification Table 3-3: Rear Panel Components Item Description Connector Color 1 Hot-plug PCI-X expansion slot 3 (bus 6) 64-b

Strany 12 - Packaged Cluster Cabling

HP CONFIDENTIAL Writer: Woody Jernigan File Name: a-frnt Codename: Sopwith Part Number: 252621-003 Last Saved On: 9/17/03 12:49 PM © 2003 Hewlett-

Strany 13 - Software Components

Component and LED Identification Table 3-4: Rear Panel LEDs and Buttons Item Description LED Color Status 1 PCI Hot Plug fault LED (slot 3) Amber

Strany 14 - Setup Preparations

Component and LED Identification Table 3-4: Rear Panel LEDs and Buttons continued Item Description LED Color Status 6 RJ-45 activity LED Green On

Strany 15

Component and LED Identification MSA500 System Table 3-5: Front Panel Components Item Description 1 Bezel blank (bay for optional redundant contr

Strany 16 - HP CONFIDENTIAL

Component and LED Identification Table 3-6: Enclosure LEDs Item LED Description Status 1 Shared Storage Module Flashing green = Module is operatin

Strany 17

Component and LED Identification Table 3-7: Rear Panel Components Item Description 1 Interconnect blanks (required for proper airflow) 2 Power su

Strany 18

Component and LED Identification 3-10 HP ProLiant DL380 Generation 3 Packaged Cluster Setup and Installation Guide HP CONFIDENTIAL Writer: Woody Je

Strany 19

4 Setup in the Configuration Fixture Perform the following procedures to set up the packaged cluster in the configuration fixture. This setup procedu

Strany 20

Setup in the Configuration Fixture Installing Hardware Options NOTE: Detailed option installation instructions are available with the options and a

Strany 21

Setup in the Configuration Fixture Cabling the System in the Configuration Fixture NOTE: The server fixture should be placed on top of the storage f

Strany 22 - MSA500 System

Setup in the Configuration Fixture 3. Connect the peripheral devices, such as the keyboard, mouse, and monitor. For information on peripheral device

Strany 23 - Table 3-6: Enclosure LEDs

HP ProLiant DL380 Generation 3 Packaged Cluster Setup and Installation Guide iii HP CONFIDENTIAL Writer: Woody Jernigan File Name: a-frnt Codename

Strany 24

Setup in the Configuration Fixture Powering On and Configuring the Packaged Cluster 1. Power on the storage system and wait for the controllers to in

Strany 25

Setup in the Configuration Fixture 4-6 HP ProLiant DL380 Generation 3 Packaged Cluster Setup and Installation Guide HP CONFIDENTIAL Writer: Woody J

Strany 26

5 Setup and Installation in a Rack Perform the following procedures to set up the packaged cluster in a rack. WARNING: To reduce the risk of pers

Strany 27 - Installing Hardware Options

Setup and Installation in a Rack Rack Planning Resources The rack resource kit ships with all HP branded or Compaq branded 9000-, 10,000-, and H9-seri

Strany 28

Setup and Installation in a Rack 1. Locate the following materials necessary for installing the storage system. Table 5-1: Rack-Mounting Hardware

Strany 29

Setup and Installation in a Rack 2. Use the instructions provided on the rack template to mark the rack for rail locations. WARNING: The storage s

Strany 30

Setup and Installation in a Rack 3. Insert the front end of the left rack rail into the inside front of the rack. Be sure that the pins extend throug

Strany 31

Setup and Installation in a Rack 4. Slide the back end of the left rack rail into the inside rear of the rack. Be sure that the pins extend through t

Strany 32

Setup and Installation in a Rack 6. Remove the hook-and-loop fasteners (1) securing the VHDCI SCSI cables and the Ethernet crossover cable to the sto

Strany 33 - Rack Planning Resources

Setup and Installation in a Rack 8. Loosen the thumbscrews that secure the storage system and slide the storage system from the storage system fixtur

Strany 34

Contents iv HP ProLiant DL380 Generation 3 Packaged Cluster Setup and Installation Guide HP CONFIDENTIAL Writer: Woody Jernigan File Name: a-frnt C

Strany 35

Setup and Installation in a Rack 9. Align the storage system with the rails and slide it into the rack. WARNING: The storage system weight, as ass

Strany 36

Setup and Installation in a Rack 10. Secure the storage system to the rack. IMPORTANT: Tightening of the shipping bracket is only necessary if the

Strany 37

Setup and Installation in a Rack 11. Use the shipping bracket to secure the system in the rack for shipping: a. Loosen the thumbscrew on the shippin

Strany 38

Setup and Installation in a Rack 1. Locate the following materials necessary for installing the servers. Table 5-2: Rack-Mounting Hardware and Tem

Strany 39

Setup and Installation in a Rack 2. Mark the rack. CAUTION: Always plan the rack installation so that the heaviest item is on the bottom of the ra

Strany 40

Setup and Installation in a Rack 4. Secure each server rail to the server. 5. Secure the left and right standard rack rails to the appropriate side

Strany 41

Setup and Installation in a Rack 6. Extend the slides from the standard rack rails, and then slide the server rails into the slides. WARNING: To r

Strany 42

Setup and Installation in a Rack 7. Press the rail-release latches and slide the server into the rack. WARNING: To reduce the risk of personal inj

Strany 43

Setup and Installation in a Rack Installing Hardware Options IMPORTANT: If your system was previously configured, skip to “Cabling the System in a R

Strany 44

Setup and Installation in a Rack 2. Secure the cable management bracket to the rail. 3. Connect the VHDCI SCSI cables labeled A and B from the stor

Strany 45

HP ProLiant DL380 Generation 3 Packaged Cluster Setup and Installation Guide v HP CONFIDENTIAL Writer: Woody Jernigan File Name: a-frnt Codename:

Strany 46

Setup and Installation in a Rack 4. If you are configuring a Microsoft® or Linux operating system, connect the Ethernet crossover cable between the s

Strany 47

Setup and Installation in a Rack 7. Route the cables and secure to the cable management arm. 8. Connect the power cords to the AC power source.

Strany 48 - Cabling the System in a Rack

Setup and Installation in a Rack Powering On and Configuring the Packaged Cluster 1. Power on the storage system and wait for the controllers to init

Strany 49

Setup and Installation in a Rack 5-22 HP ProLiant DL380 Generation 3 Packaged Cluster Setup and Installation Guide HP CONFIDENTIAL Writer: Woody Je

Strany 50

Index A K Array Configuration Utility 4-5, 5-21 KVM switchbox 4-4, 5-19 authorized reseller ix M C M-Series rack 5-2 cable Ethernet crosso

Strany 51

Index R rack M-Series 5-2 populating 5-13 third-party 5-2 rack-mounting hardware servers 5-12 storage system 5-3 RAID 4-5, 5-21 RBSU (ROM-

Strany 52

About This Guide vi HP ProLiant DL380 Generation 3 Packaged Cluster Setup and Installation Guide HP CONFIDENTIAL Writer: Woody Jernigan File Name:

Strany 53

About This Guide HP ProLiant DL380 Generation 3 Packaged Cluster Setup and Installation Guide vii HP CONFIDENTIAL Writer: Woody Jernigan File Name:

Strany 54

About This Guide viii HP ProLiant DL380 Generation 3 Packaged Cluster Setup and Installation Guide HP CONFIDENTIAL Writer: Woody Jernigan File Name

Strany 55

About This Guide HP ProLiant DL380 Generation 3 Packaged Cluster Setup and Installation Guide ix HP CONFIDENTIAL Writer: Woody Jernigan File Name:

Komentáře k této Příručce

Žádné komentáře