Compaq au-Series Specifikace Strana 84

  • Stažení
  • Přidat do mých příruček
  • Tisk
  • Strana
    / 157
  • Tabulka s obsahem
  • ŘEŠENÍ PROBLÉMŮ
  • KNIHY
  • Hodnocené. / 5. Na základě hodnocení zákazníků
Zobrazit stránku 83
Removal and Replacement Procedures
Maintenance and Service Guide 517
4. Disconnect the fan cable from the system board 1
(Figure 5-13).
5. Loosen the four silver M2.5 × 18 shoulder screws 2 that
secure the fan assembly to the base enclosure.
The fan screws are spring-loaded and are captured by the fan
assembly. Do not detach the fan screws from the fan assembly.
6. Lift up the right side 3 of the fan assembly until it clears the
top cover shield.
7. Slide the fan assembly to the right at an angle 4 to remove it
from the base enclosure.
Figure 5-13. Removing the Fan Assembly
Reverse the above procedure to install the fan assembly.
Zobrazit stránku 83
1 2 ... 79 80 81 82 83 84 85 86 87 88 89 ... 156 157

Komentáře k této Příručce

Žádné komentáře