Compaq Portable 486 - Notebook PC Specifikace stáhnout pdf (Strana 77)

>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>><<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<

CAUTION

When removing or inserting cables with ZIF connectors, do not pull, twist, or

apply tension to cables.

>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>><<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<

NOTE: The ZIF connectors in this product have mechanical latches that either

slide forward and lift up or slide up to open. Be sure the latches on the

ZIF connectors are opened before attempting to remove the cable.

4. Carefully disconnect the video board cable from the ZIF connector

(Figure 5-21).

5. Carefully disconnect two display inverter board cables (Figure 5-21).

6. Remove the display assembly and the display shield (Figure 5-21).

To replace the display assembly, reverse the steps in the above

illustrations.

>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>><<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<

CAUTION

Do not clean the display screen with soap or isopropyl alcohol. Gently wipe

the display screen with a clean, low lint cloth, moistened with water.

>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>><<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<

Backlight Assembly

To remove the backlight assembly, complete the following steps:

1. Remove the keyboard (Section 5.5).

2. Remove the front bezel (Section 5.14).

3. Remove the display assembly (Section 5.14).

>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>><<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<

CAUTION

Before touching the display assembly, be sure you are discharged of static

electricity by touching a grounded metal object.

>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>><<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<

1 2 ... 72 73 74 75 76 77 78 79 80 81 82 ... 87 88

Žádné komentáře

Compaq Portable 486 - Notebook PC Specifikace Strana 77