Compaq Armada 1120T Průvodce řešením problémů stáhnout pdf (Strana 20)

Table 2-2. Fatal Error Messages

===========================================================================

Message Description Beep Code

===========================================================================

CMOS RAM test failed A walking bit test of CMOS RAM

location 0E (Hex) - 3F (Hex) failed. 3

---------------------------------------------------------------------------

DMA controller faulty A sequential read/write of the

transfer count and transfer address

registers within the primary and

secondary DMA controllers failed. 4

---------------------------------------------------------------------------

Faulty DMA page

registers A walking bit read/write of the 16 DMA

controller page registers starting at

location 80 Hex failed. 0

---------------------------------------------------------------------------

Faulty refresh

circuits A continuous read/write test of port

61h found that bit 4 (Refresh Detect)

failed to toggle within an allotted

amount of time. 1

---------------------------------------------------------------------------

Interrupt controller

failed A sequential read/write of various

Interrupt Controller registers failed. 5

---------------------------------------------------------------------------

ROM checksum incorrect A checksum of the ROM BIOS does not

match the byte value at F000:FFFF. 2

---------------------------------------------------------------------------

RAM error at location

xxxx RAM error occurred during memory test. None

---------------------------------------------------------------------------

Parity error at

unknown location Parity error occurred. None

===========================================================================

1 2 ... 15 16 17 18 19 20 21 22 23 24 25 ... 197 198

Žádné komentáře

Compaq Armada 1120T Průvodce řešením problémů Strana 20