Compaq 2000fc Specifikace stáhnout pdf (Strana 70)

10. Remove the fan/heat sink assembly (4) by lifting straight up.

Each time the fan/heat sink assembly is removed, the thermal material must be thoroughly cleaned from

the system board at locations (1) and (2), from the fan/heat sink assembly at locations (3) and (5),

and from the processor (4). Thermal pads and thermal paste must be installed on all surfaces before

the fan/heat sink assembly is reinstalled.

NOTE: Thermal pads and thermal paste are included with all fan/heat sink assembly, system board,

and processor spare part kits.

The following illustration shows the locations for thermal material on systems with AMD processors.

After applying fresh thermal paste to the components, reverse the above procedure to install the fan/

heat sink assembly.

62 Chapter 4 Removal and replacement procedures

1 2 ... 65 66 67 68 69 70 71 72 73 74 75 ... 93 94

Žádné komentáře

Compaq 2000fc Specifikace Strana 70